Cut edge corrosion treatment in Sutton
Surveys, repairs and guarantees for metal roofs across Sutton and south London, carried out by expert contractors. If you think your roof is starting with corrosion, get a free assessment today.

We've got cut edge corrosion covered. Survey, installation, guarantee and maintenance, all under one roof.
Whether it needs a small repair at the cuts or a full roof coating, the whole job is looked after from the first visit to the guarantee on the finished work. Repairs are carried out by expert contractors, and nothing is quoted until someone has been on the roof.
The three stages of cut edge corrosion. Each one needs a different repair.
Every sheet on a metal roof was cut on site, and every cut left bare steel behind: at the eaves, along every end lap up the slope, at the verges and around the rooflights. Moisture gets in at the cut, the coating lifts back from it, and the steel starts to go. Around Sutton the metal roofing is on the estates at Beddington and Wallington and the parks along the A217, much of it from the seventies to the early two-thousands, and a roof of that age is due a look at its cuts.
A rust line at the cut
A thin brown line along the cut of the sheet. Nothing running down the roof yet, so from the ground there is often nothing to see.
Coating lifting, staining below
The coating has pulled back from the cut in a scalloped line, and rust is running down the sheets below. The stage most roofs are found at.
Holes or daylight
The sheet has corroded through in places and daylight shows at the cuts. Water is getting past the joint into the building.
Not sure how far yours has gone? Four questions will give you a rough idea.
Question 1 of 4
Exposure for Sutton is already factored in: inland with industrial pockets.
What we do. Cut edge corrosion treatment, roof coating and gutter lining.
All three are carried out by expert contractors using the systems supplied and specified by Allbase, and all three come with a Basecare guarantee.

Cut edge corrosion treatment
The cuts at the eaves, laps and rooflights are cleaned, sealed with a flexible mastic and coated with a reinforced system. The corrosion stops where it is and the sheets stay.
See the system ›
Full spray roof coating
A spray-applied coating across the whole roof, over sheets that have been cleaned, prepared and sealed. It renews the surface, covers every fixing and lap in one pass, and comes with a guarantee.
See the system ›
Gutter lining and coating
Box and valley gutters relined or coated to stop leaks at the most common weak point, done in the same visit as the roof.
See the system ›And the rest of the roof: rooflight replacement, fixings, moisture mapping to find wet insulation, and maintenance plans for roofs that have been repaired.
Certified liquid coating systems. BBA and ETA certified, and tested to C5 for corrosion resistance.
Four liquid-applied systems, chosen for the job: two for sealing and reinforcing the cuts, two for spray coating whole roofs. All of them certified, and all of them applied by expert contractors.

Repaired by expert contractors. Vetted metal roofing specialists who know the systems.
The contractors who carry out repairs in the Sutton district are approved by Allbase, work to the specification the survey produces, and are inspected when the job is done. Roofing contractors who want to join the network get trade pricing, specification support and enquiries in their area.
CHAS, SafeContractor and Constructionline are SSIP recognised schemes, and operatives hold CSCS cards. IPAF and PASMA are required where access equipment is used, and NFRC membership and ISO 9001 and 45001 certification are held by many of the contractors in the network.
Everything in one place, online. The report, the quote and the progress of the job, in your account.
- Follow the jobSee where things are, from assessment to guarantee.
- Documents in one placeThe condition report, the quotation and the completion records, ready to download.
- Message the teamQuestions and updates on the job, in one thread rather than an inbox.
What happens next. The four stages from first contact to guarantee.
Survey and condition report
A local surveyor inspects the roof and writes it up with the roof's condition and the options.
Proposal and fixed quote
The recommended works, the system, the cost and the timescale, in writing. No obligation.
Repair
An expert contractor installs to the specification, around a live site, and the work is inspected on completion.
Guarantee and maintenance
Basecare cover and the completion records, with a maintenance cycle that keeps the guarantee in place.
The proof is on the roof. Recent work by the expert contractor network.
FAQs. The questions we get asked most.
How much cheaper is this than replacing the roof?
Every roof is different, but repairing the cuts, or coating the whole roof, is routinely a fraction of stripping and re-cladding it: no tear off, no disposal, no scaffold for weeks and far less labour. The survey comes with a fixed quote, so the comparison is a real one.
When does it need the whole roof coating rather than just the cuts?
When the factory coating on the sheets themselves has started to fail, not just at the cuts: chalking when you run a hand across it, coating lifting away from the fixings, rust spots across the surface rather than along the cuts. At that point the cuts are repaired first and the whole roof is spray coated. The survey grades every elevation so the answer is written down, not argued about.
Will the work disrupt how we use the building?
Rarely. The systems are liquid-applied from the roof, so there is no tear off, no dust inside and no need to close the building. Access is agreed on the call and the contractor works around deliveries and shifts.
How long is it guaranteed for?
The repair is guaranteed through Basecare, covering the material and the workmanship together, provided it is installed by an expert contractor and maintained on the agreed cycle. The term depends on the system specified and is confirmed in writing before work starts.
Do you cover Carshalton, Wallington and the towns around Sutton?
Yes. The borough and the surrounding area are covered from this page, every SM postcode, and Carshalton, Wallington, Cheam and Epsom are the same visit.
The Sutton area. Towns, postcode districts and estates covered.
Sutton sits on the chalk south of London, with the High Street running down the hill, Nonsuch Park to the west and Carshalton's ponds to the east. The industrial ground is north at Kimpton and Willow Lane, between Sutton and Mitcham on the old Wandle valley land.
- Sutton
- Carshalton
- Wallington
- Cheam
- Worcester Park
- Banstead
- Hackbridge
- Belmont
- Epsom
- Morden
- SM1
- SM2
- SM3
- SM4
- SM5
- SM6
- SM7
- KT4
- KT17
- KT18
- CR4
- Beddington Farm Road
- Kimpton Industrial Estate
- Restmor Way
- Willow Lane Industrial Estate
- Mill Green Business Park
- Gander Green Lane
- Oldfields Road
- Peterborough Road
- Bushey Road
- Hackbridge
Ready to get it sorted?
Start with a free assessment. If the roof needs a survey, a specialist books it. If it needs repairing, the work is guaranteed.
Free assessment
A few details about the roof. Takes a few minutes, commits you to nothing.
Start the assessment